Managing Object Storage VPSAs

Command center provides cloud administrators with centralized management capabilities for
Zadara Cloud Object storage environment. Using command Center Cloud administrators can:
  • Perform various management operations on VPSA object storage instances

  • Configure Object storage availability zones resource allocation

  • Monitor Object storage capacity consumption trends

Viewing Object Storage Properties

Object Storage properties/status can be viewed in the Object Storage Dashboard tab.

image253

Property

Description

Name

Instance display name

Internal Name

internal instance name

Company

Creating user company

Description

Description given while instance was provisioned

Nova ID

Nova ID for this instance

Status

Current Instance status

Protection Zone

Instance protection zone configuration

IO Engine type

VC type for this Object storage Mini/Standard/Premium

VCPUs

VCPUs per VC type (Proxy+Storage/Proxy) for this instance

RAM

RAM per VC type (Proxy+Storage/Proxy) for this instance

SSL Termination

Where does SSL termination Occur (internal/External)

Proxy + Storage VCs

Instance Proxy + Storage VC count

Proxy Only VCs

Instance Proxy only VC count

IP Address

Instance Floating frontend IP address

Public IP

Instance public IP address

Mgmt. Address

Instance hostname for management access

Load Balancer

Instance Load balancer type (Basic\Elastic Load Balancer )

Image

Instance deployment image

UUID

Instance UUID

SNMPv3 Engine ID

Instance SNMPv3 EngineID

Created

Creation timestamp

Updated

Last update timestamp

Managing Object Storage Availability Zones

Object storage availability zones are required to support the various protection policies used in the cloud. By default there are 4 Availability zones defined in each cloud to which different storage nodes can be allocated.

Cloud administrators ability to define specific object storage protection policies is dependent on the SN to availability zone allocation scheme.

Protection Policy

Number of availability zones with SN allocated required

2-way mirroring

2

3-way mirroring

3

6+3 erasure coding

3

8+4 erasure coding

3

9+3 erasure coding

4

Assigning and removing Storage nodes to Object storage availability zones

To view current object storage availability zones configuration select the Object Storage tab and then on the following screen select the Object Storage Availability Zones tab. The Object Storage Availability Zones tab presents the current resource allocation scheme and amount of resources (VCPUs , Memory and Drives) is Allocated , Utilized or free in each availability Zone. On the lower part of the screen a list of available storage nodes and their resources inventory is displayed.

image143

To allocate a Storage Node to an Availability zone:

  • Select a storage node and click the appropriate Add to zone button on the right side of the screen

  • On the popup dialog that appears select the required availability zone and click add

  • The availability zone configuration will update to reflect the required changes.

To remove a Storage Node from an Availability zone:

  • Click on required Availability zone

  • On the Storage nodes tab locate the node you wish to remove and click the Remove button

image144

  • On the following popup dialog confirm the removal request

  • The availability zone configuration will update to reflect the required changes.

Viewing Object storage availability zones drive inventory

To view drive inventory click on the Zones Drives inventory tab, Inventory will be presented grouped by drive types.

image145

Managing VPSA Object Storage Instances

Adding drives to VPSA object Storage

From the Instances tab on the Object Storage screen select the appropriate VPSA Object storage instance. From the specific Instance dashboard click the Actions button then select Add drives from the drop down menu. On the popup dialog that will appear select the required protection policy, number of drives to be added and the drive type. Click on the Add drives button, the request will be submitted.

Note

  • When Adding drives to VPSA Object storage virtual controllers can also be added automatically depending on the drive to VC ratio

  • In case that the VPSA Object Storage instance version is older then 20.01 - virtual controllers cannot be spawn on Storage Nodes with ConnectX-5 NICs

To avoid any performance impact - drive addition process is performed gradually, configuration of drive addition increments can be performed from the settings dialog in the VPSA object storage GUI. Drive addition progress can be monitored from the VPSA Object Storage Storage Policies tab in command center.

image252

Creating a storage policy

From the Instances tab on the Object Storage screen select the appropriate VPSA Object storage instance. From the specific Instance dashboard click the Actions button then select Create Storage policy from the drop down menu.

On the popup dialog that will appear select name your new storage policy and select an appropriate protection policy from the list of the cloud supported policies. Select the number of drives you wish to assign to your new policy and the drive type to use. click on the create storage policy button , the request will be submitted for processing.

image148

Adding a proxy virtual controller

From the Instances tab on the Object Storage screen select the appropriate VPSA Object storage instance. From the specific Instance dashboard click the Actions button then select Add Proxy VC from the drop down menu.

On the popup dialog that will appear confirm the operation by clicking on the Add Proxy Virtual Controller button. The request will be submitted for processing, after completion the proxy only VCs property on the specific VPSA Object storage dashboard will be incremented.

image149

Upgrading VPSA Object storage

Command center allows administrators to perform version upgrade on the VPSA Object storage instances running in the cloud. to perform version upgrade select the appropriate VPSA Object storage instance from the Instances tab on the Object Storage screen. From the specific Instance dashboard click the Actions button then select Upgrade from the drop down menu.

On the popup dialog that will appear select the specific image level to which h you would like to upgrade and click on the Upgrade button to confirm.

image155

Another Pop up dialog will appear requesting confirmation for upgrading to the selected version click on the Upgrade button to confirm the process.

image156

The request will be submitted and the VPSA Object storage status property will change to Upgrading version while the process is running.

image157

When the VPSA version upgrade process is completed the status property will be changed back to normal and the image property will be updated to reflect the new VPSA version.

image158

Note

  • From cloud version 20.12 VPSA Object Storage upgrade to a version which more then 2 major release higher then the current version will be blocked by Command Center

  • From cloud version 20.12 VPSA Object Storage version downgrade will be blocked by Command Center

Changing VPSA Object Storage engine type

When creating a VPSA Object storage with 4 disk drives or less the VPSAs engine type will be set to MINI which is a lower footprint engine compared to the fully blown VPSA for object storage virtual controller (designed to support up to 12 disk drives). VPSA for Object Storage MINI virtual controllers can be manually converted to the fully blown footprint by Command Center.

image150

Note

VPSA Object Storage engine will be automatically upgraded when more then 4 disk drives overall are provisioned to it

To change engine type go to the appropriate object storage instance and click the Actions button and select Change Engine Type from the drop down menu. On the popup dialog that will appear confirm the operation by clicking on the Change engine button. The request will be submitted for processing. After completion the IO Engine Type property on the specific VPSA Object storage dashboard will Changed to Standard.

Hibernate VPSA Object storage instance

VPSA Hibernation will take the instance offline and free its consumed resources ( vCPU , RAM ) on the Storage Nodes level. Hibernation of a VPSA will also reduce its associated service cost. For VPSA in a hibernated state only drives are billed. Hibernating a VPSA involves the process of deleting its Virtual Controllers (the VPSA) while maintaining the data drives and all the necessary metadata to resume its operation at a later stage. Resuming a hibernated VPSA only takes a few minutes.

From the Instances tab on the Object Storage screen select the appropriate VPSA Object storage instance. From the specific Instance dashboard click the Actions button then select Hibernate from the drop down menu. On the popup dialog that will appear confirm the operation by clicking on the Hibernate button. The request will be submitted for processing, upon successful completion the VPSA Object storage status will change to Hibernated.

Assigning a Public IP address to VPSA object Storage

In specific cases where a VPSA object storage instance needs to be available for management access from outside of his Cloud allocated VLAN, a public IP address can be assigned to it. On information regarding the definition of Cloud level public IP ranges please refer to Creating Public IP addresses in this manual.

To assign a public IP address go to the appropriate object storage instance and click the Actions button and select assign public IP from the drop down menu.

image241

Public IP addresses can be automatically assigned from a cloud level pool or manually selected. To automatically assign a public IP address: On the popup dialog that will appear make sure Automatic IP address assignment is selected and confirm the operation by clicking on the Confirm button. To manually select a specific public IP address: On the popup dialog that will appear select Manual IP address assignment, select the required public IP and confirm the operation by clicking on the Confirm button.

Note

  • Manual public IP assignment is only available for VPSA object storage instances in version 20.01 and above

  • Public IP is not supported for VPSA object storage instances with IPV6 frontend address

Creating VPSA Object Storage Zsnap

To Trigger Manual creation of Zsnap for the VPSA Object storage go the its dashboard, click the Actions button and select Create Zsnap from the drop down menu. On the popup dialog that will appear provide the prefix for the Zsnap and confirm weather you would like to include the VPSA Object storage metering data. Confirm the Zsnap creation by clicking on the Create Zsnap button.

image154